Saturday, 22 August 2015

Flecktarn Special Forces

Greetings all! Remember these guys? Well, they're back in a slightly altered form:


First of all, these photos are all irritatingly shiny. I needed to use a dispersed flash in order to actually get pictures and that made the paint gleam. Finding a reliable matt varnish is a pain in the rear too, any PVP reader suggestions for a good solid matt varnish? Anyway, on with the real stuff: These are a terrifying hybrid creature made of DKK Grenadier torsos and resin cadian-style legs. They needed the grenadiers to be razor sawed through the waist (take care to preserve the lower armour plate) and then smooth the resulting cut ready to be glued to the legs. These were intended to be a Special Forces squad of the Flecktarn-style infantry. As a result the client wanted them to be reminiscent of the originals but stand out from them. Thus the decision was taken to use a different "season" of the flecktarn camo scheme, in this case Spring:

Try to ignore the SS icon, this was on all the elite Heer forces, just a shame so many of those were SS...

So as usual you need to break down the scheme to get a progression for the paint job (I have one more of these to do and am likely to do a step by step on the camo). The scheme is clearly a bright green background, with a dark brown layer providing the principle pattern. Then a brighter brown in the middle of the larger dark brown blobs. Finally more dark brown dots with bright green dots in the centre through the brown blobs. Note that this is not how the material is printed, but it is the easiest method to "stack" the camo layers while painting. The result is:


Fairly close, the green is the horrible - but perfect for this job - Vallejo Uniform Green with a mix of German Camo Black-Brown and Black for the dark blobs. Flat earth was the light brown colour of choice and the whole uniform was shaded with a thinned Agrax Earthshade. Previous flecktarn infantry dictated the German Grey armour and US Field Drab pouches etc. so that was an easy choice. These chaps however have collars, cuffs and a skull on the Ammo Rubber & Tires gas mask. What colour should these be? Anything bright was not going to be a win as these are special forces, drab is their thing. Then looking at the original camo scheme again I spotted the uniform collar. Perfect, thought I, so Val German Fieldgrey it was. It also looked cracking on the skull.


With so many colours going on with these guys already I wanted to keep all other spot colours very muted. Once you get above three or four principle colours you are getting dangerously close to gaudy and visually noisy. All you can do to keep the miniature focused is to boost certain colours and mute others in the hopes that you keep the whole job unified. I think these guys are pretty much there.

That's all folks! I know August has been a smidge quiet here on the ol' PVP but that's largely due to the rest of my life packing everything about six months of stuff to do into the eighth month. August has been proper busy... and isn't done yet. I'll be back to mostly normal in September but hey, at least August has had some updates right?

TTFN

Friday, 7 August 2015

Great big whacking tanks

Hi folks, as promised, the KV-1 is finished and is a whacking great slab of green!


Yep, this is the same KV-1 (KV stands for Kliment Voroshilov, the defence commissar at the time of its commissioning) that was the focus of a workbench article about brass etch back in... wow... March. The KV series was designed to be a siege tank and it's armour and gun did indeed come as something of a nasty surprise to the Germans who found that it was just plain immune to anything but their biggest weapons. The problem came when these slow lumbering tanks were compared to the T-34 - so far beyond its time that it ought to have come with a TARDIS - and found somewhat wanting. The up-gunned variants of the T-34 (the T-34-85 - hah, just used shortcut keys to do that, ctrl+K and then ctrl+V, KV, gave me a chuckle) could hit as hard, move faster, presented less of a silhouette and be made quicker and cheaper. Soviet tactical doctrine was never going to ignore the value of having two of something in favour of one survivable something and so the poor KV-1's days were shorter than would have been in other armies.


I've already waxed so lyrical about this kit in the build log that you could make a singing candle but if you will indulge me just once more: Wow, seriously, if you have any interest in WW2 gaming do yourself a favour and join Maisey, Emma and I in choosing 1:48 as your vehicle scale of choice. The scale "feel" is better with the chunky 28mm lads and oh god. The kits. There is no contest between a 1:48 multimedia plastic kit designed for armour modellers - and in the case of HobbyBoss often a reduced version of their hyper detailed 1:35 kits - and the 1:56 resin and "wargamer grade" plastic kits you can get. No contest. I will say that if you are the sort to see your models as nothing but wound counters then stick with the 1:56's they'll go together fast and get you on the table. But if like me you love a bit of armour modelling... no contest, and the range grows all the time.


There's a real problem - well two, but I'll get to that - with WW2 painting, especially Soviet, and blogging: There are only so many ways you can say "Well, I painted the whole thing green. Yup, that's about it". So I shall mostly let the pictures do the talking and assume if you are curious about painting methodology you'll check out the T-34-85 and T-70 articles. Literally nothing is different here save less scratches and dings and subtler dust. The KV-1 simply doesn't go fast enough to cover itself too badly in filth. What's that? The second problem? Oh, painting WW2 troops with any fidelity leaves them rather drab in photos. Sure you can push the contrasts and get a better photo but then you end up with cartoons. There's a reason that high contrast is "studio style" and fetishised by some online, it makes for better photographs. However, painting for realism is my great enjoyment so sometimes I just have to eat the fact that the photos won't be great.


Just to show how big the KV-1 is I've assembled a little motor pool of my Sov armour along with happy Ivan the flag waving goon. The KV-1 makes even the T-34-85 look a bit compact and bijou, the T-70 looks like a toy! For those who are curious, these latest additions have swelled my Soviet ranks rather nicely and are now clocking in at well over a thousand points. While I won't be able to shake the Sov habit any time soon I think I need to start thinking about the next project. My problem is that I want to do too many, which to choose? Heer pioneers? Oh, but those Panzergrenadiers are really shiny... Commando raiders? But then there's the Sikh's in Burma who are an unusual project... or 8th army/Afrika Korps in the desert... you've always been fascinated by the Paras and Market Garden... but heck, there's Band of Brothers yanks too, if only they'd make plastics for either of those...

[indecision fades gently to black...]

TTFN

Monday, 3 August 2015

For the Motherland!

Pozdravleniya tovarishchi! It's been a wee while but the Russians are here again on the ol' PVP blog. 


Just like last time I decided to batch paint the whole box - Warlord's Siberian Veterans - in one go. The paint jobs are simple enough that 20+ batches aren't such a trial. I've needed some more infantry for a while and the Siberian box had the advantage of including a medium machine gun and a nifty commissar with loud-hailer so seemed a no-brainer. Lets start with the least interesting unit first.


Least interesting maybe but very useful nonetheless, this is the second light machine-gun squad of the army. The mainstay of any Sov infantry army, these are unremarkable but effective. The painting follows exactly the same model as the first time round, but this time I did a few tweaks. I ditched the tonal variation in the greens as, bluntly, it didn't really produce results worth the extra time. Instead I separated the Val Russian Uniform green summer uniforms from the padded telogreika uniforms by painting the latter in Val Khaki Grey mixed with a dab of Val Russian Uniform. This still breaks up the unit a bit but doesn't take forever. For those who may be curious, the mix of summer and padded uniforms indicates to me early spring. I'm designing the army's look to be around about April. Still cold enough for soldiers to be comfortable in the telogreika but not so cold that they must be worn. Equally, cold enough that those exposed to the elements - tank riders for example - would still be wearing greatcoats. Thus giving me a nice excuse to include some of their nice new winter troops as tank riders later on!


The maxim MMG in the Siberian box is modelled in a pose I can best describe as "cheese it!". I'd have preferred a firing one, as they don't move often in game but beggars can't be choosers and I'm sure I'll pick up another one in time. The painted sections of the maxim are in that ubiquitous russian green used on helmets, tanks, artillery, frankly, I reckon they'd have painted soldiers that green if they could. It's Val Cam Olive Green with a glaze of Athonian Camoshade to add some subtle shading.


And now what I suspect is the reason for the "cheese it!" pose on the gun, there's a commissar yelling behind them and no-one wants to show insufficient zeal... The Commissars of the NKVD were a hangover from Stalin's first purges, initially as a second in command rubber-stamping the commander's orders if they were politically acceptable. This proved... inefficient at best and around 1942 the "commissars" were retired and turned into "zampolit" responsible for morale and discipline. In practice this usually took the form of rounding up those who ran from the enemy and shooting them. Stalin's regular "not one step back" orders were almost literally enforced, much of the Soviet reputation for relentlessness came from a lack of choice. It was the enemies guns or the guns of the NKVD. At least the enemy might give quarter...

Neither of these models are what I'd call "top notch" but both have character. The standard bearer is displayed in the only good angle it has available I'm afraid and has a face only a mother could love. He is though carrying a whacking great flag and is the perfect ADC for a bolt action commissar. The flag is an overhighlighted red going through the GW reds up to Wild Rider. It was then glazed first with a shade of red and chestnut ink. Then a glaze of Bloodletter to brighten the red. The zampolit, aside from the blue uniform trousers and cap is essentially identical to the men. The coat is Val US Drab with lots of little red piping details. Both were quite a lot of fun to paint. Especially getting the ruddy faced commissar's skin tone right with layers of glazes of mixed flesh tones and reds.


Finally, we have that rarest of things in the Soviet Red Army: Veterans. The Red Army had a nasty habit of treating war as a numbers game alone, those who survived the first few weeks of battle were tough indeed and forged into lethal fighters. They also had a habit of scavenging equipment from all and sundry leading to them being rather more enthusiastically armed than the average troopers. Aside from some battle damage to, and a couple of slogans on the helmets their uniforms are the same as the normal lads.


One of the real differences is in the scavenged German gear some of them sport. An MG-42 - one of the best machine guns of the war - an MP-40 and a couple of Panzerfausts mean these guys are armed for bear when added to their PPSh-41's, Thompson's and their DP-28 light machine gun. These were scavenged from German infantry frames I've got for doing a small Pioneer army. It's strange how different just adding a belt of ammo - not normally a Soviet feature - makes to their "feel". I decided to push that feel a little further though:


The soldier on the left is from the veterans squad, the right is from the Light MG squad. I wanted to make the veterans look tired, ill, stressed. Being a veteran soldier in the hell of the Eastern Front means more than being an experienced fighter, it also means having seen and endured rather a lot... that leaves a mark. This was achieved by using light grey instead of Flayed One Flesh in the final highlight mix for the skin. Combine this with a purple wash into the eye sockets and stubble and you have tired, strung-out, ill looking people. It tuned out quite effective and helps mark them out as veterans.

General Mulder approves
That's all for now folks-ski's but while I was putting these lads in their case I saw the KV1 that I did the build log on a fair while ago. It has actually been painted. The only reason I haven't photographed it for the blog yet is I hadn't weathered it yet. I'll get on that and actually finish that article! Until next time

TTFN

Friday, 17 July 2015

Eisenkern Command

Hi folks! Remember these chaps? Well, we're back with some more, this time from the command box set:


I'm just going to come straight out and say this, these fellas just do not photograph well. The combination of the always difficult to shoot adjacent blacks combined with the gloss annihilating shading and highlighting means that they look waaaaaay better in the flesh. But ho hum! This is what we got so just engage imagination and press on. These were made with Dreamforge's Eisenkern command set and were then modified to have GW weapons to make them more Imperial Guard. I will say, I was a little disappointed with the options included. The set really only allows you to make exactly what is on the box. No real opportunities to play with the configuration. They're mix and match though so if you have other Eisenkern sets they cross-mojinate. In this case mercifully we had some spare arms so the special weapon squad could work.


Speaking of the special weapon squad. My client thought there were only five models in the box so the extra unit was a pleasant surprise. We decided that they would work well as a small squad of special weapon wielding dudes and that a "breach and clear" affair could be fun. Two meltaguns to crack open that tank/bunker/starship airlock and three flamers to hose the resulting breach. Nasty. As with the last squads of these, painting is fairly straightforward, the brief was "Tie Fighter Pilot" so shiny black the order of the day. To separate areas of the model, the undersuit is Ammo Rubber and Tires, the armour German Grey and then everything got washed black. The armour got another glaze of black before highlighting with the Grey and the gloss.


The command squad itself includes a nice long range comms/scanner thing with a nice little laptop. Strapping a medical auspex and a bunch of pouches to one of the Eisenkern and combining it with a white medic helmet made a decent field doctor. The flag comes with the kit and as with all these CAD-made less-than-a-millimeter-thick-details is a bear to paint cleanly. Seriously guys, we need either more height or a wider detail. Finally, the officer is just the standard Eisenkern with a chaos plasma pistol. If you ever want a nice baroque plasma pistol, go chaos, they've got lots of lovely exposed wiring. Makes it look dangerous.

And that's all folks, short one today with not being able to see lots of cool detail. More next week!

TTFN

Tuesday, 14 July 2015

The Very Model of a Modern Empire Captain

Greetings one and all, in the fairly lengthy drying times for the Eisenkern commission I am working on I was able to knock out a quick captain for my Averlanders. Frankly it is time you were introduced:


This is the amazing, and slightly over formal, Captain Harald von Agbeiten of the glorious Averland Northern Relief Forces (read, invading force trying to take over the almost knackered Ostland). The model originally was the commander of the first iteration of the Empire Steam Tank. I long ago sold the teeny tiny tank but kept the incredible commander figure... for years. Well, he's been painted now!


With painting Averlanders being a nicely formulaic process regardless of rank - seriously, I just go a little neater on the highlighting for the characters - he was bashed out good and fast. I did change up the colour on the sash a little, making it a more saturated, higher contrast fabric trying to be more silk-ish. Haven't quite got the effect but it does look more yellowey than the military ochre on the clothing.


Harald is armed with a repeater pistol, the model was originally an engineer don't forget, which technically can't be used by a captain. There were a couple of ways around this, one, I could just ignore the rules. Done it before, will 100% do it again I am sure. But not this time, this time I decided to make him an idiot who had bought a multi-barrelled pistol masquerading as a repeater pistol but in fact just letting off all four small calibre bullets in one volley. Achieving the same effect that a single pistol would achieve but at four times the cost. Like I say, idiot. With a veneer of snob.


Other than his name, I haven't got Harald's backstory nailed down (it'll be on the Beard Bunker anyway). He will certainly be an old fashioned soldier out of retirement with a keeping up with the Jones' attitude and a stuffy manner leading to him bringing a damn box into battle from which to deliver inspirational speeches to the men. It's what they like after all.

That's all for today, some Eisenkern troops later in the week (more of these lads), until then

TTFN

Friday, 10 July 2015

Aren't you a little short for a Huntsman?

Greetings one and all, in a sharp left turn from all the aeroplane themed posts of late; I thought I would go for very, very footslogging fantasy dudes. Short ones to be precise:



These are a selection of Halflings from various eras of Citadel variants. They are masquerading as Huntsmen for my Averland army. With The Moot being practically in Averland it helps the theme of the army to use these instead of the human archers.


Given that most of them are... kinda gormless looking, I figure them for being the easily led and persuaded sorts that might join a northbound expedition. They're also dim enough to not notice that they've mostly been given cast off children's dress-up uniforms, hence the ill-fitting garb. Irritatingly the close ups really don't look all that great, largely because these fellas are only 20mm tall. Suffice to say, they look more convincing in the flesh!


Painting wise, they are mostly the PVP Codified Averlander Scheme with occasional splashes of green to bust up the uniformity and linen shirts on any that have them. Deck Tan is the best colour I've found for this.


Love the fearless leader, clad in armour and with a chicken leg from the supply halfling (the one eating the supplies, he has more in a bag). It has a cartoonish charm. I'm rather taken with these yokels-playing-at-soldiers:


...Not least because of all the fun wee details hidden around the back of the figures. Pots, pans, tankards marked "mine", the whole nine yards. Bundles of fun. Now, I need to address a quick elephant in the room, you may notice that these fellas are based on square bases and in a custom built skirmish movement tray. None of which fits the "new warhammer" of Age of Sigmar. Well, I'm not moving on from 8th edition. I don't really want to rake over the coals of the many, many problems with AoS. If you are curious you can see my views and those of my gaming group over on the Beard Bunker. Here, I'll just say, if you're into warhammer 8th edition, you will find lots to please you. If it is Age of Sigmar (and why not? Each to their own)? Not so much. Anyway, that's all for today, more Averlanders soon!

TTFN

Monday, 6 July 2015

Like a Thunderbolt from a clear sky

Yes folks, Project Thunderbolt is done! First, I think some musical accompaniment is needed, crank this up:


Yep, the long running series keeping content on the blog while I batch painted two massive aircraft is finally concluded. We can finally bask in the loveliness that is the Thunderbolt and I'm rewarding myself with a rather generous glass of Pimms (it is summer after all and I'm British). But enough waffle, to pictures of shiny things!


Obviously, I have talked at length about painting these guys so I'll mainly be focusing on the finishing weathering and detail stages and waxing rhapsodic about how lovely these sculpts are. Seriously, I defy anyone to hold one of these in their hands for more than a minute without making it "fly" and murmering "braaaauuuuu dakkkakakka" under their breath. That is the mark of a cool aircraft, vroom noises. Fact. But anyway! Weathering on aircraft is all about restraint, there really won't be a lot of chips and dings that aren't battle damage. Frankly, if an aircraft is flying into something hard enough to chip the paint then that is a sad, sad, crashing plane. So keep the normal chipping to an absolute minimum. Instead, streaks of muck, soot, dust, whatever the plane might have flown through are the best option. Note that while the jets are heat-discoloured, the rear "jet" isn't. That's because I figure the rear nozzle is the rocket motor that Thunderbolts have to break atmosphere (completely wrote "break atmo" in a Firefly reference but figured clear communication over nerd points) and these haven't been fired yet.


On the wings you can see the streaks of dirt, on the dark surfaces it was mostly Ammo Rain Marks streaked on and stumped with odourless thinner. The undersides were more muddy coloured to stand out. I realised I hadn't talked about the decals much as to my decision making process for where they should go. Some were obvious, the numeral and weird sine wave thing were in the classic place that the JG-52 markings were found. The rest needed to have some thought put in. Most of the "label" style decals were scattered around areas that need to be "soldier proof", bomb mountings, ammo storage etc. Things like the little white triangles I figured would work nicely as a targeting point for machine spirits to lock on to the plane when recovering to a carrier. There are a bunch of little steel discs that initially looked like fuel ports but there were way too many. I figured instead they were magnetic cradle clamping points. The triangles allow the cradle machine spirit to target the attachment points.


The business end of the Thunderbolt! Beware all ye that this is pointed at.


And that same business end with the torpedo of significant Jeff-obsession clamped on. The yellow cradle blends so nicely with the nose cone that it could have been designed to go there. Really happy with how that went down. You can see the muddy-toned streaks on the wings and some of the labelling decals if you zoom in on this view.


There have been better shots of the pilots but this final round-up didn't feel right without showing off at least one of them.


And finally, the prodigious collection of ordnance and an example of the basing. The rubble was my normal mix for urban basing, sand, cork granules and Secret Weapon bricks all welded down with thinned PVA. The ordnance was orginally all white (so it would not show up against the pale underside of the aircraft. The red, white and yellow elements would pick up the spot colours on the plane. The bombs though, just looked like toys in white. Did not work. So instead, I pulled the mid grey colour from the fuselage and used that as the ordnance colour. The torpedo got a dark sea blue tone. Torpedoes want to be camouflaged against the dark ocean once fired so a darker tone is appropriate. The ordnance seems small compared to the aircraft (which are huge) but each was like painting a normal 28mm fig (but simpler paint scheme).

And we're done! It's been quite the long haul but I hope you've enjoyed the journey. These now need to be shipped off to the client and long years of happy air-to-mud exploding action.

TTFN